AFTERCARE
GUIDE

To maintain the film’s appearance, regular washing and cleaning are essential. We recommend washing the car using XPEL wash solution or Xpel Foam soap to avoid excessive contamination buildup. Car washes are safe for paint protection film, but it is recommended to use touchless car washes or those that are well-maintained and newer to avoid any issues.

Avoid getting the PPF wet or driving in the rain for the first 24 hours.

Do not use a pressure washer near the edges of any film. A strong stream can lift or damage the material.

Small, hazy spots or moisture bubbles under the film are normal and will evaporate on their own within one to two weeks. Do not try to push, poke, or press on them.

Remove bug guts, bird droppings, or other stains as soon as possible with XPEL PPF Cleaner.

For more stubborn stains, 99% isopropyl alcohol can be used, but be extremely careful to keep it off the vehicle’s painted surfaces.

To maintain the film’s high gloss or satin finish, apply XPEL Ceramic Boost at least once every six months.

Light scratches in the film will self-heal in 20-30 minutes at room temperature. To accelerate the process, pour warm water (120°F) over the affected area.

For 48 hours after installation, avoid washing your car or getting it wet to allow the coating to cure properly.

We recommend using XPEL wash solution or Xpel Foam soap to avoid excessive contamination buildup.

Wash from the roof down, leaving the dirtiest sections for last. Always dry the vehicle completely using a clean, soft microfiber towelor air blower. Never let water evaporate on its own, as it can leave mineral deposits. Avoid washing in direct sunlight to prevent streaking and water spotting.

For fingerprints or smudges, XPEL Detail Spray is
perfect for quick clean-ups between washes.

Remove bird droppings, bug splatter, and other ontaminants as soon as possible by spraying XPEL detail spray to surface and wipe with a microfiber cloth to prevent them from etching the coating.

You can apply the XPEL Ceramic Boost (as needed) for added shine and slickness. Avoid applying XPEL Detail Spray or XPEL Ceramic Boost in direct sunlight,

Do not use strong chemicals, solvents, or abrasive cleaning tools, as they can damage the coating.

You will receive a no-charge appointment notification from Rogue Films once a year for a ceramic inspection and testing. This includes a free car wash.

Refrain from rolling down your windows for at least three days after installation.

A hazy appearance or small bubbles are normal for up to ten days after installation as the moisture used to apply the film dries completely.

After the initial curing period, use a glass microfiber towel and spray XPEL glass cleaner on film surface and wipe clean with the microfiber towel. The XPEL glass cleaner can also be used to clean the
exterior glass surfaces as well.

Do not use scouring pads or other abrasive
materials to clean your tinted windows.

Do not wash your vehicle or get the windshield
wet for at least 48 hours after installation.

Do not use a pressure washer near the edges of any film.
A strong stream can lift or damage the materials.

Small, hazy spots or moisture bubbles under the film are normal and will
evaporate on their own within one to five days. Do not try to push, poke,
or press on them.

Use XPEL Waterless Wash for cleaning the film surface on a regular basis.
Treat and seal the film surface once every two weeks with XPEL Ceramic Boost.
The ceramic spray will keep the surface sealed.

Always use a soft microfiber cloth or sponge. Avoid paper towels or
other abrasive materials that could scratch the film.

ONLY USE WIPERS IN RAINY CONDITIONS. Do not use wipers to clean the
windshield. Use XPEL Waterless Wash before you drive to clean the windshield.
Regularly wipe down your wiper blades and consider replacing them every
3-6 months with silicone blades for a smoother glide.

When removing snow or ice, do not use sharp tools or metal scrapers.
Warm the vehicle’s windshield up to defrost it before driving in ice and snow.